·348·
Programming manual
CNC 8055
CNC 8055i
13.
HIGH-LEVEL LANGUAGE PROGRAMMING
·M· & ·EN· MODELS
SOFT: V02.2X
Variables
Read-write variables updated by the CNC once function G49 is
executed
Accessing the variables TOOROF or TOOROS interrupts block preparation and the CNC waits for
that command to be executed before resuming block preparation.
When having a swivel or angular spindle, general machine parameter XFORM (P93) with a value
of 2 or 3, the CNC shows the following data:
TOOROF
It indicates the position to be occupied by the spindle's main rotary axis in order to orient the spindle
perpendicular to the indicated inclined plane.
TOOROS
It indicates the position to be occupied by the spindle's secondary rotary axis in order to orient the
spindle perpendicular to the indicated inclined plane.
To Next Page
Loading...
