Fagor 8055 M - Page 367

Programming manual
CNC 8055
CNC 8055i
HIGH-LEVEL LANGUAGE PROGRAMMING
13.
·M· & ·EN· MODELS
SOFT: V02.2X
·367·
Variables
PLCMMn
This variable permits reading or modifying the PLC mark (n).
(PLMM4=1)
It sets mark M4 to ·1· and leaves the rest untouched.
(PLCM4=1)
It sets mark M4 to ·1· and the following 31 marks (M5, through M35) to ·0·