Programming manual
CNC 8055
CNC 8055i
PROGRAM CONTROL INSTRUCTIONS
14.
·M· & ·EN· MODELS
SOFT: V02.2X
·413·
Screen customizing instructions
The wait for data entry will only occur when programming the format of the requested data. This
format may have a sign, integer part and decimal part.
If it bears the "-" sign, it will allow positive and negative values, and if it does not have a sign,
it will only allow positive values.
The integer part indicates the maximum number of digits (0-6) desired to the left of the decimal
point.
The decimal part indicates the maximum number of digits (0-5) desired to the right of the decimal
point.
If the numerical format is not programmed; for example: (IB1 =INPUT "text"), the mnemonic will only
display the indicated text without waiting for the data to be entered.
To Next Page
Loading...
