Fagor 8055i FL EN - WORKING WITH OPERATIONS OR CYCLES; Level 3. Face threading.; Level 4. Thread repair.

·116·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING WITH OPERATIONS OR CYCLES
·TC· OPTION
SOFT: V02.2X
Threading cycle
Level 3. Face threading.
The following data must be defined:
• Coordinates of the starting point.
• Coordinates of the last point.
• The thread pitch.
• The distance to the end of the thread.
• The total depth.
• The spindle angular position.
• The distance to the end of the thread.
Level 4. Thread repair.
Available when setting spindle machine parameter "M19TYPE (P43)=1".
The following data must be defined:
• Coordinates of the starting point.
• Coordinates of the last point.
• The thread pitch.
• The distance to the end of the thread.
• The total depth.
• Z coordinate of the valley (root).
• The spindle angular position at the valley (root).
• The distance to the end of the thread.
Z
X

Xf, Zf
Xi, Zi

H
P

Z
X

Xf, Zf
Xi, Zi

H
P
