Fagor 8055i FL EN - WORKING WITH OPERATIONS OR CYCLES; Level 5. Threads with several entries.

Operating manual
CNC 8055
CNC 8055i
WORKING WITH OPERATIONS OR CYCLES
3.
·TC· OPTION
SOFT: V02.2X
·117·
Threading cycle
Level 5. Threads with several entries.
Available when setting spindle machine parameter "M19TYPE (P43)=1".
The following data must be defined:
• Coordinates of the starting point.
• Coordinates of the last point.
• The thread pitch.
• Thread type (variable pitch or fixed pitch).
• The distance to the end of the thread.
• The total depth.
• Z coordinate of the valley (root).
• The spindle angular position at the valley (root).
• The number of thread entries.
• The distance to the end of the thread.
Z
X

Xf, Zf
Xi, Zi

H
P
