Feig Electronic OBID i-scan ID ISC.PR101 User Manual

OBID i-scan
®
System-Manual ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH Page 30 of 131 H60301-3e-ID-B.doc
CUSTOMER OPTION (from firmware version 1.04-A, 1.03-USB):
Bit: 7 6 5 4 3 2 1 0
Function 0 0 0 0 0 0 0
Bit0
Bit0 (INFINEON-OPTION):
b0: Use ISO Cmd’s for Read/Write Infineon-Tag (4Byte Blocksize)
b1: Use Infineon Custom Cmd’s for Read/Write Infineon-Tag (8Byte Blocksize)
ISO-Blocksize:
Defines the block size of an unknown ISO-transponder or if the transponder is used in the
non-addressed mode.
Range: 0x01 ... 0xFF
A value of 0x00 will be automatically set to a block size of 4byte.

Feig Electronic OBID i-scan ID ISC.PR101 Specifications

General

Brand	Feig Electronic
Model	OBID i-scan ID ISC.PR101
Category	Other
Language	English