Festo CPX-CMAX-C1-1 User Manual

5. Parameter
5−100
Festo P.BE−CPX−CMAX−CONTROL−EN en 0908NH
Commissioning function
valve and sensor status
PNU PNU: 1192 Index: 8 Max index: 8 Class: Struct Data type: int32
Values Without unit
Default: 0 Minimum: 0 Maximum: 0
Internal parameter.
ý The parameter value cannot be changed.
o Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
o After writing, controller recalculation is carried out.
System of measurement units
PNU PNU: 1193 Index: 1 ...12 Max index: 12 Class: Struct Data type: int32
Values Without unit
Default: 0 Minimum: − Maximum: −
Determines the physical units, see section B.1.
ý The parameter value cannot be changed.
o Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
o After writing, controller recalculation is carried out.
System of measurement for resolution
PNU PNU: 1194 Index: 1 ... 12 Max index: 12 Class: Struct Data type: int32
Values Without unit
Default: 0 Minimum: − Maximum: −
Determines the scaling/resolution or number of decimal places, see section B.1.
ý The parameter value cannot be changed.
o Writing permissible only in commissioning/parametrising mode with disabled controller.
o This parameter can be written by FCT without higher−order controller.
o After writing, controller recalculation is carried out.

Festo CPX-CMAX-C1-1 Specifications

General

Brand	Festo
Model	CPX-CMAX-C1-1
Category	Controller
Language	English