FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 21
Copyright 2018 FlexRadio Systems. All Rights Reserved.
7.3 USING SMARTLINK
Use SmartLink to operate your Flex 6000 Series radio with a computer running SmartSDR for
Windows Version 2 connected to the Internet from a remote location. SmartLink provides
authenticated, secure access to the radio over the Internet at effective data transfer speeds.
It is not necessary to log into SmartLink when connecting to radios that are on the local network (for
instance the same room/house). They will appear in the radio chooser when SmartSDR is first
started. Simply click on the desired radio, then click the Connect button.
To connect to a radio from a remote location, start by launching SmartSDR. You will see a window
like this:
Click the button and follow the screens to log into your SmartLink account. Use the
credentials you used to create the SmartLink account (see section 7.2.1, Create a SmartLink
Account).
To Next Page
Loading...
