FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 149
Copyright 2018 FlexRadio Systems. All Rights Reserved.
35.4 NETWORK TAB
The network tab offers information and settings related to the radio’s network connection.
The Network tab contains the IP address, sub-net mask and MAC address in use by the radio.
Pressing the Advanced button reveals controls that allow the user to assign a fixed IP address to the
radio. Press the Static button then enter the desired IP address, sub-net mask and gateway address.
Press Apply. The radio will reboot. SmartSDR will lose its connection to the radio and will return to
the Startup screen. The radio can be returned to dynamic IP address assignment by use of the DHCP
button.
The Enforce Private IP Connections button enables (default) and disables a network security feature.
When enabled, only private network IP addresses may connect to the radio when the radio is
connected to a private network. These are the 10.0.0.0 - 10.255.255.255, 172.16.0.0 -
172.31.255.255 and 192.168.0.0 - 192.168.255.255 address blocks. When disabled, any address may
connect.
To Next Page
Loading...
