FlexRadio Systems FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 81
Copyright 2018 FlexRadio Systems. All Rights Reserved.
The recommended setting is to leave the speech processor enabled and in the NORmal or DX
position.
20.3.3 How to Configure the Equalizer (EQ)
The Transmit Equalizer control panel is illustrated above with the TX and ON buttons highlighted.
With these buttons selected, the graphic equalizer can be optimized for different microphones and
operating styles such as DX, contesting and SSB. The sliders provide a +/- 10 dB adjustment range
over eight octaves. The settings shown above provide very good audio quality for many dynamic
microphones.
In a similar fashion, the Receive Equalizer is enabled with the RX and ON buttons. With these buttons
selected, the graphic equalizer can be optimized for different listening conditions and operating
styles. The sliders provide a +/- 10 dB adjustment range over eight octaves.

FlexRadio Systems FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-6000 Signature Series
Category	Transceiver
Language	English