FlexRadio Systems FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 62
Copyright 2018 FlexRadio Systems. All Rights Reserved.
Default profiles can be modified or deleted from the radio using the Profile Manager but will be
restored if the radio is reset to the factory defaults (see section 0).
Note: Default profiles can be modified, but the modifications cannot be saved using the default
profile name. A new profile name must be entered.
16.7 COMPARING PROFILES AND PERSISTENCE
Profiles are different from persistence. As described above, profiles are a way to manually save and
restore a complete radio configuration and then return to that configuration later. Profiles require
action on your part to both save and restore but are a very quick way to put the radio in exactly the
state you want.
Persistence, always enabled on your Signature Series radio, remembers settings from band to band
without your direct action so that when you return to a band your settings are restored. For example,
if you are operating on 20m and set the output power to 60W, then go to 10m and set the output
power to 100W and then go back to 20m, persistence will return your 20m power to 60W. Resetting
the radio to the factory settings (see section 0) will clear the persistence settings.

FlexRadio Systems FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-6000 Signature Series
Category	Transceiver
Language	English