FlexRadio Systems FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 59
Copyright 2018 FlexRadio Systems. All Rights Reserved.
Take care when creating a new MIC profile to ensure that the Slice Receiver that is selected to control
the transmitter also selects the mode to be associated with the new MIC profile. If this is not the
case, the new MIC profile may become associated with the wrong mode.
To creating a MIC profile, LSB and USB are a single mode (SSB), as are DIGU and DIGL (Digital), FM,
NFM and DFM (FM) and AM and SAM (AM). Each Waveform installed in the radio is treated as a
separate mode.
To delete a profile, select the appropriate profile name and click the delete button.
Note: Performing a database reset from the front panel of the radio will delete all non-default
profiles. It is recommended that you export your profiles with all options selected before
performing a database reset.
16.5 LOADING PROFILES
To load a profile from the Profile Manager Window, select the desired profile and click load or simply
double click the profile name.
Global profiles can be quickly loaded from the “Profiles” drop-down menu. The saved profiles will
show up under the “Import/Export Profiles…” selection.

FlexRadio Systems FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-6000 Signature Series
Category	Transceiver
Language	English