Limitorque QX Electronic Actuator FCD LMENIM3314-01 – 06/18
6
Table 4.10 Gearing and Clutching, QX-3 thru 5 30
Table 4.11 Clutch Shaft Subassembly, Item 6. QX-1 & 2 31
Table 4.12 Clutch Shaft Subassembly Item 6. QX-3 Thru 5 32
Table 4.13 Clutch Shaft Subassembly Item 7 33
Table 4.14 Pipe Plug 35
Table 4.15 Baseplate F/FA-10 QX-1 & 2, F/FA-12 & 14 QX-3 thru 5 36
Table 4.16 Baseplate Subassembly Item 3 36
Table 4.17 Worm Shaft Parts List 37
Table 4.18 Drive Sleeve, Stops, and Encoder Shaft Assembly 40
Table 4.19 Multi-turn Encoder Shaft Subassembly (Item 1-6) 41
Table 4.20 Optional Baseplate Removal 43
Table 4.21 Torque nut, F/FA-10, QX-1 & 2 and F/FA-12 and -14, QX-1 thru 5 44
Table 4.22 Torque nut F/FA-05 and -07 QX-1 & 2 and F/FA-10, QX-1 thru 5 44
Table 4.23 Optional Thrust Base Assembly 45
Table 4.24 Optional Thrust Base Subassembly 46
Table 5.1 90º Encoder Assembly 48
Table 5.2 Encoder Subassembly, Item 14-1 49
Table 5.3 Multi-Turn Encoder Assembly 50
Table 5.4 6.5-Turn Spur Gear Subassembly (Item 17-2) 51
Table 5.5 20-Turn Spur Gear Subassembly (Item 17-2) 51
Table 6.1 Terminal Cover Assembly 54
Table 6.2 Terminal Cover Subassembly 55
Table 6.3 Controls Cover Assembly 55
Table 6.4 Controls Cover Subassembly 56
Table 6.5 Control Module Assembly 57
Table 6.6 Low Voltage (Less than 250 VAC) Control Module Subassembly 58
Table 6.7 High Voltage (Greater than 250 VAC) Control Module Subassembly 59
Table 6.8 DCV Control Module Subassembly 60
Table 6.9 Terminal Block Assembly 61
Table 6.10 Control Board Connectors 66
Table 6.11 Screw Part Numbers 67
Table 6.12 Optional Transformer Assembly 67
Table 6.13 Optional Transformer Subassembly 68
Table 7.1 Connector to Wire Position per Supply Voltage 74