Fluke DTX-MFM2 - Page 317

Index
9
results, 10-12
running the test, 10-11
PoE, 10-8
Port Blink, 10-15
power
powering the tester, 1-14
specifications, 13-36
power down timer, 1-25
Power Line Frequency
coaxial setting, 5-4
twisted pair setting, 3-5
power meter, 7-51
measurement is too high or too low, 9-4
MONITOR mode, 7-52
SINGLE TEST mode, 7-53
problems
with the tester, 13-7
propagation delay
coaxial, 5-10
diagnosing failures, 6-8
Loopback mode, 7-33
Smart Remote mode, 7-25
specifications, 13-18
twisted pair, 3-18
PSACR test, 3-27
PSELFEXT
diagnosing failures, 6-4
test, 3-31
PSNEXT
diagnosing failures, 6-4
test, 3-27, 3-28
–R–
reference test cord
replacement, 13-7
testing, 7-9, 7-11
referencing
coaxial, 5-1
fiber
Far End Source mode, 7-36
Loopback mode, 7-28
Smart Remote mode, 7-20
when to set, 7-10
twisted pair, 3-1
registration, 1-2
Remote End Setup, 7-14
renaming results, 12-8
resistance
coaxial, 5-10
diagnosing failures, 6-7