Product Overview
60
Product Overview
2
7 Push-button power switch
Switches the power of the machine on and off.
z
Refer to "Power Source" (P.49).
8 <Interrupt> button
Press this button to suspend a copy or print job in progress to have the machine process
another job. During the Interrupt mode, the <Interrupt> button lights up. Pressing the
<Interrupt> button again exits the Interrupt mode and resumes the suspended job.
z
For notes and restrictions on the Interrupt mode, refer to "Appendix" > "Notes and Restrictions" > "Notes and Restrictions on the
Interrupt Mode" in the Administrator Guide.
9 <Clear All> button
Returns the settings you made to the default values. The machine returns to the same state
as when it is powered on.
10 <Stop> button
Press this button to pause the current job or communications.
11 <Start> button
Press this button to start scanning a document.
12 <Main Power> indicator
Lights up when the main power is switched on.
z
If the main power is not switched on, the machine will not be powered on even when the power is switched
on.
13 <Error> indicator
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs with the machine,
including paper jams and running out of paper or toner.
z
If the <Error> indicator blinks, contact our Customer Support Center.
z
If the <Error> indicator lights up, refer to "Problem Solving" > "Machine Trouble" in the Administrator Guide.
14 <Data> indicator
Blinks when the machine is sending or receiving data to or from a client.
This indicator lights up when data is stored in the machine's memory, when received faxes
are waiting to be printed, or when faxes are stored in a folder.
z
You can check stored scan files in a Folder List. For information on the Folder List, refer to "Machine Status" > "Machine
Information" > "Print Reports" > "Folder List" in the Administrator Guide.
z
You can check stored fax files in a Stored File List. For information on the Stored File List, refer to "Machine
Status" > "Machine Information" > "Print Reports" > "Job Status/Activity Report" > "Stored File List" in the
Administrator Guide.
z
You can change the lighting pattern of the <Data> indicator. For more information, refer to "Tools" >
"Common Service Settings" > "Other Settings" > "Data Indicator" in the Administrator Guide.
15 <Speed Dial> button
Press this button to specify a recipient with an address number when sending a fax or e-
mail.
16 <C (Clear)> button
Press this button to cancel a numerical value you have entered with the numeric keypad.
17 <Dial Pause> button
Press this button to insert a pause into a destination number.
To Next Page
Loading...
Need help?
General
