Fujitsu ETERNUS CS800 User Manual

10.8 Notifications
Figure 195: Destinations Page
Tasks
Use the Destinations page to perform the following tasks:
l View information about SNMP destinations (see "Trap Destination List" on page 306).
l Add an SNMP destination (see "Adding a Destination" on page 306).
l Edit an SNMP destination (see "Editing a Destination" on page 308).
l Delete an SNMP destination (see "Deleting a Destination" on page 309).
Trap Destination List
The Trap Destination List displays the following information about SNMP destinations:
IP
Address
The IP address of the destination.
Name The name of the destination.
Selected
Traps
The traps the ETERNUS CS800 sends to the destination (Failure, Warning,
Informational, Available, or Unavailable).
Adding a Destination
Add an SNMP destination to send traps from the ETERNUS CS800 to the destination.
You can add up to 5 destinations.
To add a destination:
306 ETERNUS CS800

Fujitsu ETERNUS CS800 Specifications

General

Brand	Fujitsu
Model	ETERNUS CS800
Category	Storage
Language	English