EasyManua.ls Logo

Fujitsu FI-6000NS - Page 115

Fujitsu FI-6000NS
437 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.6 Using the Network Settings Menus
Network Scanner fi-6000NS Operator's Guide 87
Administrator Operations
3
4. Enter a monitored fax server (Right Fax) e-mail address in the "Fax Server e-Mail
Address" field.
This may be up to 255 characters long. One of the following e-mail address formats must be
used:
XXXXXXX@IP_address
XXXXXXX@Host_name
XXXXXXX@Domain_name
If the fax server setting is not required, leave the field blank.
5. Press the [OK] button.
The fax server is set.
XXXXXXX Comprised of alphanumerics and the following symbols.
! # $ % & ' * + - / = ? ^ _ ` { | } ~ .
However, periods (.) cannot be used in the following cases.
Using periods (.) as a initial character
Using periods (.) as a last element
Using periods (.) consecutively
IP_address Comprised of numbers separated by periods (.).
IP addresses within the following ranges may be used:
1.0.0.1 - 126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.255.255.254
Host_name Comprised of alphanumerics and hyphens (-) only. Initial character
may not be a hyphen.
Domain_name Name elements comprised of alphanumerics and hyphens (-) are
separated by periods (.).
Each name element may contain up to 63 characters, and only
alphabetic characters may be used for the last element.

Table of Contents

Other manuals for Fujitsu FI-6000NS

Related product manuals