Fujitsu FI-6000NS - Editing a Contact in the E-Mail Address Book

4.4 Sending the Scanned Data by e-Mail
Network Scanner fi-6000NS Operator's Guide 195
Regular User Operations
4
5. Press the [OK] button.
⇒ The address is added to your My List.
4.4.3 Editing a Contact in the e-Mail Address Book
The following explains how to edit a contact stored in your My List. Contacts stored in the LDAP
list cannot be edited.
1. Open the "e-Mail Address Book" screen.
To access the "e-Mail Address Book" screen, on the "Send e-Mail" screen, press the
button to the right of an e-mail address field.
Or on the "Main Menu" screen, press the [Maintenance] button, then on the "Maintenance"
screen, press the [Edit e-Mail Address] button. For details, refer to "4.12 Maintenance"
(page 267).
2. Select the [My List] tab.
3. Select the contact that is to be edited.
4. Press the [Edit] button.
⇒ The "Edit e-Mail Address" screen appears.