Fujitsu FI-6000NS - Alert Monitor System Log Messages

Network Scanner fi-6000NS Operator's Guide 359
C
C.1.3 Alert Monitor System Log Messages
System log messages which may be received from the scanner alert monitor service can be
arranged into the following three types:
• Information
• Error
• Warning
■ Information
The following table gives a summary of system log information messages which may be received
from the scanner alert monitoring service.
No action is required.
Code Message Action
01001013 Scanner alert monitor started. No action required.
01001014 Scanner alert monitor start date/time =
yyyy/MM/dd HH:mm:ss
01001015 Scanner alert monitor stopped.
01001016 Scanner alert monitor stopped by sys-
tem standby mode.
01001017 Scanner alert monitor restarted after
resume from standby.