108
3.6.9 Setting the Network Folders (File Servers)
■ Registering a Network Folder
Up to 100 network folders can be registered.
1. Select the [Network Settings] tab on the top menu.
2. Press the [Down] button on the left side menu.
⇒ Scroll the left side menu down until the [Network Folder] tab appears.
Note the following when registering a network folder.
• The network folder is registered as a network path. If the network folder is
on a Windows file server and the length of the full Windows path including
the file name exceeds 259 characters, the scan data will not be saved.
Before registering a (Windows) network folder, check that the length of the
full file path+name is not likely to exceed 259 characters.
• If the selected folder was created using a language foreign to that of the
browsing operating system, the network folder may not register correctly. If
the name of the network folder contains unrecognizable characters, check
the codeset used.
• If the number folders to be displayed is large, they may take a long time to
appear.
To Next Page
Loading...
