Fujitsu FI-6000NS - Chapter 3 Administrator Operations

3
Network Scanner fi-6000NS Operator's Guide 27
Chapter 3
Administrator Operations
This chapter provides an explanation of the administrator operations, which are used to setup and
manage the scanner.
Messages may appear while performing operations described in this chapter. For more details
about these messages and actions to take, refer to "C.1.2 System Log Messages" (page 357).
Symbols used in this chapter:
: Administrator operating via the touch panel.
: Administrator operating via the network interface using the fi Network Scanner
Admin Tool.
3.1 Required Scanner Function Settings.................................................................. 28
3.2 Administrator Control Screens............................................................................ 29
3.3 Administrator Login: via the Scanner's Touch Panel........................................ 31
3.4 Administrator Login: via the Network Interface................................................. 34
3.5 Using the System Settings Menus ...................................................................... 45
3.6 Using the Network Settings Menus..................................................................... 70
3.7 Using the Device Status Menus......................................................................... 127
3.8 Using the Operation Logs Menus...................................................................... 133
3.9 Using the Maintenance Menus........................................................................... 144