Fujitsu FI-6000NS - Removing the Margin

106
■ Removing the Margin
The edge of the scanned data is printed as a black frame. This setting is for removing the edge of
the scanned data. This setting applies to all printers.
1. Select the [Network Settings] tab on the top menu.
2. Press the [Down] button on the left side menu.
⇒ Scroll the left side menu down until the [Network Printer] tab appears.
3. Select the [Network Printer] tab on the left side menu.
⇒ The "Network Printer" screen appears.
4. Press the [Margin Removal] button.
⇒ The margin removal screen appears.