Fujitsu FI-6000NS - Setting Scanning Performance

3.5 Using the System Settings Menus
Network Scanner fi-6000NS Operator's Guide 67
Administrator Operations
3
3.5.8 Setting Scanning Performance
Usually, it is not necessary to make any setting changes.
1. Select the [System Settings] tab on the top menu.
2. Press the [Down] button on the left side menu.
⇒ Scroll the left side menu down until the [Scanner Adjustment] tab appears.
3. Select the [Scanner Adjustment] tab on the left side menu.
⇒ The "Scanner Adjustment" screen appears.