Fujitsu FI-6000NS User Manual

5.5 Replacing Parts
Network Scanner fi-6000NS Operator's Guide 279
Scanner Care
5
5.5 Replacing Parts
The following table specifies the replacement part numbers, the standard replacement cycles, and
the color of the [Consumable Alert] button.
These replacement cycles are rough guidelines. They may vary according to the type of documents
scanned, scanner usage, and cleaning frequency.
To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner service
provider.
Part name Part No. Replacement cycle
[Consumable Alert] button
color
Pad assembly
(PAD ASSY)
PA03289-
0111
After every 50,000 sheets
scanned or once a year
(when using 64 g/m
2
(17lb) A4/Letter wood-
free or wood containing
paper)
Green until the number of
documents scanned reaches
45,000 sheets.
Orange after 45,000 sheets.
Red after 50,000 sheets.
Pick roller PA03289-
0001
After every 100,000
sheets scanned or once a
year
(when using 64 g/m
2
(17lb) A4/Letter wood-
free or wood containing
paper)
Green until the number of
documents scanned reaches
95,000 sheets.
Orange after 95,000 sheets.
Red after 100,000 sheets.
ATTENTION
• When the [Consumable Alert] button becomes orange or red, contact your
scanner administrator to replace the necessary part.
• Use only the PFU LIMITED parts specified. Do not use consumable parts
made by other manufacturers.

Fujitsu FI-6000NS Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Optical scanning resolution	600 x 600 DPI
Display	TFT
Scanner type	Flatbed & ADF scanner
Product color	Gray
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Scanning noise level	59 dB
Daily duty cycle (max)	- pages
Auto document feeder (ADF) input capacity	50 sheets
Minimum scan area (ADF)	53 x 74 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Standard interfaces	Ethernet, SCSI-3
Server operating systems supported	Windows 2000 Server, Windows Server 2003
Input voltage	100-240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	10 W
Power consumption (typical)	88 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS
Cabling technology	10/100BASE-T(X)
Dimensions (WxDxH)	315 x 415 x 281 mm
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP

Weight and Dimensions

Depth	415 mm
Width	315 mm
Height	281 mm
Weight	13000 g