EasyManuals Logo

Fujitsu FI-6000NS User Manual

Fujitsu FI-6000NS
437 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
1.5 Scanner Requirements
Network Scanner fi-6000NS Operator's Guide 19
Scanner Overview
1
SMTP Server
SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail.
The SMTP server can be used to perform the following:
Sending the scanned data as an e-mail
Sending the scanned data by fax
File Server
The file server shares the disk on a server with other computers on a network, and enables use of
the disk from an external computer.
It can be used to save the scanned data in a network folder.
Print Server
The print server is used to print the scanned data. Printers to be used are set on the print server.
WINS Server
The WINS server handles name registration requests from WINS clients, register their names and
IP addresses, and responds to NetBIOS name queries submitted by clients, returning the IP address
of a queried name if it is listed in the server database.
In addition, when a DNS name resolution fails, the query can be transferred to the WINS server.
DHCP Server
The DHCP server automatically assigns an IP address for this scanner and other client PCs.
NTP Server
The NTP server is used when a client makes a time query through network.
ATTENTION
Windows® XP compatible printer drivers must be registered.
Printer must be able to spool print jobs (to hard disk or memory). Contact
your printer dealer if uncertain whether your printer has a spool function.
Printers that allow the status of print errors to be easily checked (via a LCD
control panel, or similar) are recommended.
HINT
Use only network printers connected to the print server.

Table of Contents

Other manuals for Fujitsu FI-6000NS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu FI-6000NS and is the answer not in the manual?

Fujitsu FI-6000NS Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth24 bit
Maximum scan size210 x 297 mm
Optical scanning resolution600 x 600 DPI
DisplayTFT
Scanner typeFlatbed & ADF scanner
Product colorGray
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Scanning noise level59 dB
Daily duty cycle (max)- pages
Auto document feeder (ADF) input capacity50 sheets
Minimum scan area (ADF)53 x 74 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Standard interfacesEthernet, SCSI-3
Server operating systems supportedWindows 2000 Server, Windows Server 2003
Input voltage100-240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)10 W
Power consumption (typical)88 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Cabling technology10/100BASE-T(X)
Dimensions (WxDxH)315 x 415 x 281 mm
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP
Weight and Dimensions IconWeight and Dimensions
Depth415 mm
Width315 mm
Height281 mm
Weight13000 g

Related product manuals