EasyManuals Logo

Fujitsu FI-6000NS User Manual

Fujitsu FI-6000NS
437 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
144
3.9 Using the Maintenance Menus
3.9.1 Maintaining the User Data Store
The scanner's user data store can be backed-up, restored, and deleted.
The user data store contains the following information:
Fax Number List (one per scanner)
"My List" e-Mail Address Books (one per user)
Scan Settings (for each user)
User Logs (for each user)
Scanner login user names are authenticated with the LDAP server, and when a new name is
encountered, the scanner automatically adds an entry for that user to the user data store. The user
data store may contain up to 1,000 users.
The following example illustrates how the number of users could exceed 1,000:
1. 100 users (A001 to A100) log in.
2. The user data store is backed up (with 100 users: A001 to A100).
3. The user data store (containing users A001 to A100) is cleared.
4. 960 "new" users (A001 to A050 and B001 to B910) login.
ATTENTION
Once 1,000 user names have been used to login, new user logins are no
longer possible until the entire user data store is cleared. Refer to "Backing
up the User Data Store" (page 146) and "Clearing the User Data Store"
(page 152) for details.
It is recommended that the user data store be backed up before it is
cleared.
When restoring from a user data store backup, if a backed up user name
corresponds to that of an existing user in the current user data store, the
backup user data will overwrite the current user data. If the backed up user
name is "unknown", the backed up data will be added as a "new" user.
Addition of new users cannot cause the 1,000 user limit to be exceeded, or
the user data store restoration will fail.
When the User Data Store is restored from a backup, the Fax Number List
is also reverted to its old state.

Table of Contents

Other manuals for Fujitsu FI-6000NS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu FI-6000NS and is the answer not in the manual?

Fujitsu FI-6000NS Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth24 bit
Maximum scan size210 x 297 mm
Optical scanning resolution600 x 600 DPI
DisplayTFT
Scanner typeFlatbed & ADF scanner
Product colorGray
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Scanning noise level59 dB
Daily duty cycle (max)- pages
Auto document feeder (ADF) input capacity50 sheets
Minimum scan area (ADF)53 x 74 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Standard interfacesEthernet, SCSI-3
Server operating systems supportedWindows 2000 Server, Windows Server 2003
Input voltage100-240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)10 W
Power consumption (typical)88 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Cabling technology10/100BASE-T(X)
Dimensions (WxDxH)315 x 415 x 281 mm
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP
Weight and Dimensions IconWeight and Dimensions
Depth415 mm
Width315 mm
Height281 mm
Weight13000 g

Related product manuals