4.8 Setting the Scan Options
Network Scanner fi-6000NS Operator's Guide 239
Regular User Operations
4
4.8.4 Scan Mode
Set whether one side or both sides of documents are scanned.
1. On the "Scan Settings" screen, select the [Basic] tab.
2. Press the [Scan Mode] button.
⇒ The "Scan Mode" screen appears.
3. Select [Simplex] if only the front sides of the documents are to be scanned. Select
[Duplex] if both front and reverse sides are to be scanned.
⇒ Selecting a scan mode returns you to the "Scan Settings" screen. The selected mode is
displayed to the right of the [Scan Mode] button.
To Next Page
Loading...
