Fujitsu FI-6000NS - 3.3 Administrator Login: via the Scanners Touch Panel

3.3 Administrator Login: via the Scanner's Touch Panel
Network Scanner fi-6000NS Operator's Guide 31
Administrator Operations
3
3.3 Administrator Login: via the Scanner's Touch
Panel
1. Press the startup button.
⇒ The "Login" screen appears.
ATTENTION
• If the normal screen display does not appear, wait for a few minutes and
try again. If the problem still occurs, contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner service provider.
• If changes are made to settings, such as IP address settings, when buffer
jobs are already queued, these jobs may not be processed normally. In
such cases, wait for all buffer jobs to be processed before changing any
settings.
• If the [Cancel] button is rapidly pressed many times in succession, a "The
page can-not be displayed" message may appear. Selecting another tab or
reloading the page will refresh the screen.
HINT
• The user name and initial password for the administrator are as follows:
User Name: admin
Password: password
• Only one administrator or user can login to the scanner at any one time.
• Timeout time is 20 minutes (fixed). The timeout time is extended by a further 20
minutes for the following:
• when a tab on the top menu or left side menu is pressed
• when the [OK] button is pressed
Startup button