Fujitsu FI-6000NS - Multifeed Detection (Layer and Length)

256
4.8.13 Multifeed Detection (Layer and Length)
"Multifeed" is an error that occurs when two or more sheets are fed simultaneously into the scanner
by the ADF. The scanner can be set to detect multifeeds and stop the scan with an error message.
Multifeeds are to be detected by layer and length. The following explains how to set whether or not
multifeeds are to be detected, and setup multifeed detection method.
For multifeed requirements, refer to "A.5 Multifeed Detection Conditions" (page 328).
1. On the "Scan Settings" screen, select the [Advanced] tab.
2. Press the [Multifeed Setup] button.
⇒ The "Multifeed Setup" screen appears.