Fujitsu FI-6000NS - Length Magnification Setting

3.5 Using the System Settings Menus
Network Scanner fi-6000NS Operator's Guide 69
Administrator Operations
3
■ Length Magnification Setting
If the scanned output is found to be vertically distorted (stretched or squashed) relative to the actual
documents being scanned, the length magnification can be adjusted.
1. On the "Scanner Adjustment" screen, enter the value for the "Length Magnification"
input field.
This changes the length magnification correction value of the vertical scan. Using the fac-
tory default setting as a starting point, the length of the scan can be magnified or reduced to
between -3.1% and 3.1%.
2. Press the [OK] button.
⇒ The length magnification setting is set.