158
■ Restoring System Settings
The system settings backup file can be returned to the scanner to restore system settings to those at
the time backup was taken.
1. Select the [Maintenance] tab on the top menu.
2. Select the [System Settings File] tab on the left side menu.
⇒ The "System Settings File" screen appears.
3. Enter a backup file to restore from.
Press the [Browse] button to select a file.
A version 01.01.01.0030 backup file cannot be used to recreate the system
settings in a version 01.01.01.0025 or version 01.01.01.0026 system.
Attempting to perform this particular system settings restoral operation will
cause an error message to appear. To restore the system settings from a
version 01.01.01.0030 backup file, the system must first be upgraded to ver-
sion 01.01.01.0030 or later.
To Next Page
Loading...
