120
3.6.10 Setting the Destination for Alert Notifications
An e-mail address can be specified to which an alert notification will be sent whenever a scanner
alert situation occurs.
It is necessary to set a SMTP server before alert notifications can be sent. For more details about
how to set an SMTP server, refer to "3.6.6 Setting the e-Mail Server (SMTP Server)" (page 84).
When the destination for alert notification is set, alert notification messages will be sent to the reg-
istered e-mail address in the following title.
Network Scanner (Scanner Name: xxxx) Alert Notification message
For more details, refer to "C.1.3 Alert Monitor System Log Messages" (page 359).
1. Select the [Network Settings] tab on the top menu.
2. Press the [Down] button on the left side menu.
⇒ Scroll the left side menu down until the [Alert Notification] tab appears.
3. Select the [Alert Notification] tab on the left side menu.
⇒ The "Alert Notification" screen appears.
To Next Page
Loading...
