Fujitsu FI-6000NS - Regular User Messages; Regular User Screen Messages

Network Scanner fi-6000NS Operator's Guide 363
C
C.2 Regular User Messages
The following messages may appear during regular user operation.
C.2.1 Regular User Screen Messages
Screen Message Action
Login Administrator operation in progress,
please wait...
Only one administrator or user can
login to the scanner at any one
time. Please wait until operations
are completed.
Login failed. Check the user name and
password, and try again.
Try the following:
• Enter a valid user name and
password, and try again.
• Contact a system administrator
and have them check that the
LDAP server is set.
• Contact a system administrator
to have the server status
checked.
• Contact a system administrator
to check if the password has
expired.
Scanner initialization has failed. Try
turning the power off and back on
again. The administrator should con-
tact the FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help
If the scanner does not restart auto-
matically, disconnect the AC cable
from the scanner to turn the power
off, wait for at least ten seconds,
then reconnect the AC cable and
try turning the power back on
again. If the error status persists,
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.