Fujitsu FI-6000NS - Using the LCD Touch Panel

24
2.2 Using the LCD Touch Panel
When using the LCD touch panel, buttons only need to be lightly pressed to select them.
For details how to operate the touch panel, refer to "3.2 Administrator Control Screens" (page 29)
or "4.2 Using Touch Panel Screens: Regular User" (page 179).
ATTENTION
• Do not use a pen or other hard object on the LCD touch panel.
The LCD touch panel may be damaged.
• If the screen is dirty, this may cause the LCD touch panel to malfunction.
Clean the screen if it is visibly dirty.
For details, refer to "5.3 Cleaning the LCD Touch Panel" (page 278).