Fujitsu FI-6000NS - Enabling;Disabling the Scan Viewer

258
4.9 Enabling/Disabling the Scan Viewer
The "Scan Viewer" screen can be set to appear before the scanned data is processed.
The scanned data can be checked and edited on the "Scan Viewer" screen. For details, refer to
"4.10 Editing the Scanned Data in the Scan Viewer" (page 261).
If desired, in the following screens, the "Scan Viewer" screen can be set to be appear before the
scanned data is finally processed.
• "Send e-Mail" screen
• "Send Fax" screen
• "Print" screen
• "Save" screen
The following explains how to enable or disable the "Scan Viewer" using the "Send e-Mail"
screen.
1. On the "Send e-Mail" screen, press the [Scan Viewer] button.
⇒ Pressing the [Scan Viewer] button will toggle the setting back and forth between "On"
and "Off".