4.8 Setting the Scan Options
Network Scanner fi-6000NS Operator's Guide 257
Regular User Operations
4
3. If mutlifeeds are to be detected, select which detection method is to be used.
⇒ This returns you to the "Scan Settings" screen. The selected setting is displayed to the
right of the [Multifeed Setup] button.
Multifeed
Setup
Status
None Multifeeds are not detected.
If scanning plastic cards, select [None]. For more details about scan-
ning plastic cards, refer to "A.2 Paper Requirements" (page 323).
Ultrasonic Multifeeds are detected by layer.
Length Multifeeds are detected by length.
Both Multifeeds are detected by both layer and length.
An error will occur if the [Length] or [Both] multifeed setting is used
with the [Auto] paper size, and the document bundle being scanned
contains different size pages.
To Next Page
Loading...
