Fujitsu FI-6000NS - Changing the Admin Password

3.5 Using the System Settings Menus
Network Scanner fi-6000NS Operator's Guide 61
Administrator Operations
3
3.5.6 Changing the Admin Password
1. Select the [System Settings] tab on the top menu.
2. Press the [Down] button on the left side menu.
⇒ Scroll the left side menu down until the [Admin Password] tab appears.
3. Select the [Admin Password] tab on the left side menu.
⇒ The "Admin Password" screen appears.
ATTENTION
Login is not possible without a password, therefore manage them carefully.
If a password has been lost or forgotten, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service provider.