160
The network interface connection will be lost when the scanner is restarted
to complete the restoration of the system settings. To continue with other
settings, wait a short time for the device to restart, then login to the net-
work interface again.
As the network interface connection to the scanner requires the IP
address or scanner name, if this is changed by the restoration of the sys-
tem settings (i.e. if the backed up IP address or scanner name is different
to the pre-restoration IP address or scanner name), the new IP address or
scanner name will be needed. If not known, the current state of these set-
tings can always be checked by physically logging in to the scanner via the
touch panel interface.
To Next Page
Loading...
