4.6 Printing the Scanned Data
Network Scanner fi-6000NS Operator's Guide 215
Regular User Operations
4
2. Select the print scale of the data.
By default, this is "100%".
• Shrink to Fit
The image is reduced so that the entire image fits into the area available for printing (area
inside the dotted line). Further enlargement is not possible.
If the positioning setting is "Center", the control point for printing is the center point of the
area available for printing. If the positioning setting is "Top Left", the control point for
printing is the top left corner of the area available for printing. For more details on the
positioning setting, refer to "4.6.2 Positioning" (page 219).
Print Sheet Scanned Data Positioning Result
Small Large Center
Top Left
Available Area
for Printing
Control Point
Center
Control Point
Top Left
Available Area
for Printing
To Next Page
Loading...
