4.7 Saving the Scanned Data to a Network Folder
Network Scanner fi-6000NS Operator's Guide 227
Regular User Operations
4
9. On the "Scan Viewer" screen, press the [Save] button.
⇒ The specified file name is used to save the scanned data in the selected network folder.
⇒ The "Main Menu" screen is shown again.
After a file has been created from scanned data, while waiting for the save process to
complete, the scanner prepares for the next operation. All processes queued so far are
performed at the same time, and are referred to as buffer jobs. A maximum of ten jobs
may be buffered.
If the saving to the network folder fails, an error message with the follow-
ing title is sent by e-mail from the scanner to the e-mail address registered
in the LDAP server for the currently logged-in user.
Error Message from Network Scanner (Scanner Name: XXXXX)
To Next Page
Loading...
