Network Scanner fi-6000NS Operator's Guide xxvii
Protect the scanner from static electricity.
Avoid any contact when scanner is in use.
Disconnect the power plug from the power outlet when the scanner is not
used for a long period of time.
Do not install the scanner in direct sunlight.
Before moving the scanner, make sure the shipping lock is locked.
Be aware of the pick spring.
Install the scanner away from strong magnetic fields and other sources of electronic
noise. Also, protect the scanner against any static electricity, which can cause the
scanner to malfunction.
Avoid touching any scanner mechanism during scanning since this may cause injuries.
When the scanner is not going to be used for a long period of time, be sure to
disconnect the power plug from the power outlet.
Do not install the scanner under direct sunlight or near heating apparatus. Doing so
might cause excessive heat to build up inside the scanner, which can cause scanner
trouble or even fire. Install the scanner in a well-ventilated location.
When moving the scanner, be sure to lock the shipping lock in order to prevent
damages to the scanner.
When you perform cleaning, make sure that the inside of the scanner is free of any
foreign object, and be careful not to get your hand or the cloth caught on the pick spring
(metal part) as a deformed pick spring (metal part) may cause injury.
To Next Page
Loading...
