Network Scanner fi-6000NS Operator's Guide 375
C
Print Server
Authentication
User name is required. Enter a user name.
Network is busy. Try again later. Wait for a while, and try again.
User name or password may be incor-
rect.
Re-enter the user name and pass-
word.
Cannot find the network printer path. Contact a server administrator.
Not connected to the network. Check that the system network is
functioning normally by perform-
ing a ping test from another
machine in the network, other than
the server with network printer. If
the system network is not operat-
ing correctly, refer to "Failure to
connect to a server using its IP
address" (page 305) for further
solutions.
Scan&Buffer job is already queued on
the computer that owns the specified
network printer.
Try the following:
• Select a different network
folder.
• Wait a short time, then try
again.
Access was refused. Contact a server administrator to
find out if an access permit has
been set.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Close unneeded network connec-
tions, then try specifying the
desired network path again.
Specified user is no longer able to
login to this network printer.
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the account vali-
dated.
Specified password is no longer valid
for this network printer.
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the account vali-
dated again.
Error: network printer could not be
accessed.
Contact a network administrator to
check whether the network folder
can store data.
Screen Message Action
To Next Page
Loading...
