Network Scanner fi-6000NS Operator's Guide 381
C
Others An error has occurred. The system
must be restarted. Any buffered jobs
will be canceled. After restarting the
system, if the same error occurs, it
may be due to a scanner failure. In this
case, remove any documents that have
been fed into the scanner, disconnect
and reattach the power cord, and
restart the system again. If problem
persists, the administrator should con-
tact a FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help. [alphanumeric eight
digits]
If the problem persists, the admin-
istrator should contact a FUJITSU
scanner dealer or an authorized
FUJITSU scanner service pro-
vider.
Screen Message Action
To Next Page
Loading...
