3.5 Using the System Settings Menus
Network Scanner fi-6000NS Operator's Guide 51
Administrator Operations
3
If the [Later] button is pressed on the restart confirmation screen, the cur-
rent scanner name and the next scanner name (after restart) are displayed
on the Scanner Name screen.The next scanner name can be changed
again by entering a new scanner name in the current scanner name field
and pressing the [OK] button. Alternatively, the scanner can be reverted to
its old name (i.e. no change after restart) by pressing the [OK] button with-
out changing the current scanner name.
Use the following procedure to restart the scanner after the [Later] option
has been selected:
1. Press the [Logout] button.
A restart confirmation screen appears.
2. Press the [Restart] button.
The scanner is restarted, and the normal "Login" screen appears.
To Next Page
Loading...
