56
4. Select a date format.
This date format is applied to the date/time when it is used to name scan data files and the
date shown on screens.
5. Enter the current date and time in the "Date/Time" input field.
The date and time shown are those current for when the "Date/Time" tab on the left side
menu was selected.
The date/time range that may be entered is from "January 1st 2001, 00:00:00" to "December
31st 2037, 23:59:59".
When entering a one digit number for date and time, such as for January, prepend "0" and
enter "01" in the input field.
6. Press the [OK] button.
⇒ The date and time are set.
Pressing the [Get Time] button refreshes the current value of the internal
system date/time.
An adjustment that advances the system time by 20 minutes or more
results in a session timeout and causes the scanner to logout.
To Next Page
Loading...
