64
4. Set the area for multifeed detection in the "Multifeed Detection" section.
Starting from the top edge of a document sheet, set the area to be checked for multifeeds.
Full Multifeeds will be detected within 35mm (1.4in) of the vertical center-
line of the document.
Middle Multifeeds will be detected within "#1" (upper limit) and "#2" (lower
limit) set. (a)
Top & Bot-
tom
Multifeeds will be detected from the top of the page to "#1" (upper
limit), and from #2 (lower limit) to the bottom of the page. (b)
Center of paper
35mm
(a)
#1
#2
Up to 510mm
Outside of multifeed
detection area
Center of paper
35mm
(b)
#1
#2
(b)
Up to 510mm
Outside of multifeed
detection area
To Next Page
Loading...
