Chapter 5. Communication
114 AT600 User’s Manual
Command 187 (0xBB): Write Alarm Configuration (cont.)
Command 191 (0xBF): Test Digital Output
This command is to test the digital output
Table 89:
Command-Specific Response Codes for Write Alarm Configuration
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3-4 Undefined
5 Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7Error In Write Protect Mode
8-15 Undefined
16 Error Access Restricted
8-127 Undefined
Table 90: Request Data Bytes for Test Digital Output
Byte Format Description
0 Unsigned-8 Channel Number(1/2)
1 Unsigned-8 Test DO Type
Test Stop
Pulse
Frequency
Alarm
2 - 5 Unsigned-32 Test value
To Next Page
Loading...
