AT600 User’s Manual 121
Chapter 5. Communication
Command 196 (0xC4): Read Transducer Information
Command 197 (0xC5): Read Transducer Traverses and Spacing
This command is to read transducer traverses and spacing.
16 - 19 Float Transducer Wedge SOS
20 - 23 Float Transducer Tw
Table 107: Command-Specific Response Codes for Read Transducer Information
Code Class Description
0 Success No Command-Specific Errors
1-5 Undefined
6 Error Device-Specific Command Error
7-127 Undefined
Table 108: Request Data Bytes for Read Transducer Traverses and Spacing
Byte Format Description
None
Table 109: Response Data Bytes for Read Transducer Traverses and Spacing
Byte Format Description
0 Unsigned-8 Transducer traverse
1 - 4 float Transducer spacing
Table 110: Command-Specific Response Codes for Read Transducer Traverses and Spacing
Code Class Description
0 Success No Command-Specific Errors
1-5 Undefined
6 Error Device-Specific Command Error
7-127 Undefined
Table 106: Response Data Bytes for Read Transducer Information (cont.)
To Next Page
Loading...
