GE AT600 - Page 139

AT600 User’s Manual 127
Chapter 5. Communication
Command 204 (0xCC): Write Transducer Information (cont.)
Byte Format Description
301: C-RL-0.5
302: C-RL-1
304: C-RL-0.5
305: C-RL-1
307: C-RL-0.5
0 - 3 Unsigned-32 Transducer type:
0: Other;
4 - 7 Unsigned-32 Transducer Frequency
8 - 11 Unsigned-32 Transducer Wedge Type
12 – 15
Unsigned-32
Transducer Wedge Angle
16 – 19 Unsigned-32 Transducer Wedge SOS
20 - 23 Unsigned-32 Transducer Tw
Table 127: Response Data Bytes for Write Transducer Information
Byte Format Description
0 - 3 Unsigned-32 Transducer type:
0: Other;
4 - 7 Unsigned-32 Transducer Frequency
8 - 11 Unsigned-32 Transducer Wedge Type
12 – 15 Unsigned-32 Transducer Wedge Angle
16 – 19 Unsigned-32 Transducer Wedge SOS
20 - 23 Unsigned-32 Transducer Tw
Table 128: Command-Specific Response Codes for Write Transducer Information
Code Class Description
0 Success No Command-Specific Errors
1-4 Undefined
5 Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7Error In Write Protect Mode
8-15 Undefined
16 Error Access Restricted
17-127 Undefined
Table 126: Request Data Bytes for Write Transducer Information (cont.)