GE AT600 - Page 79

AT600 User’s Manual 67
Chapter 3. Initial Setup and Programming
3.7.3b Setting the Special Transducer (cont.)
Press [] again, and a screen similar to the following appears.
Use the [] or [] arrow key to select the digit to be changed, use the [] or
[] arrow keys to change the Wedge SOS setting, and press
[] to return to the
previous screen. Then press [
] to return to the Transducer screen.
Select
Time Wedge and press [√]. The following screen appears.
Press
[] again, and a screen similar to the following appears.
Use the [] or [] arrow key to select the digit to be changed, use the [] or
[] arrow keys to change the Time Wedge setting, and press
[] to return to the
previous screen. Then press [
] to return to the Transducer screen.
Wedge SOS
Wedge SOS
2482 m/s
Wedge SOS
UNIT: m/s
248
2
]MOVE
]UNDO [ ]SAVE
]
]
]MODF
[
Special Transducer
Wedge Type
Wedge Angle
Wedge SOS
Time Wedge
Time Wedge
Time Wedge
7.500 us
Time Wedge
UNIT: us
7.500
]MOVE
]UNDO [ ]SAVE
]
]
]MODF
[